Check the runout of bearings. If necessary, replace the parts. Set all labels to the corresponding provisions of the TDC. Install new belt on the toothed wheel and drive components. Loosen tensioner pulley bolt, so that he freely moved in the direction of the belt.
Set the video to the end position, observing the proper belt tension. In systems without automatic tensioning roller use measuring devices for checking belt tension. Check the position of labels. Crank the engine in the direction of rotation for at least 2 full turns to ensure optimal tension belt. Recheck the position of labels. Tighten the clip to the prescribed torque. Install the cover and all you have taken part in its place. Install the cable 'weight' on the battery. Start engine. If necessary, conduct the necessary adjustments Adjustments timing or injection. Dispose of the old belt. Some of the comments when mounting, if required maintenance manual, use special tool. Lay the belt by hand, avoid the use of screwdrivers and other tools that can damage the surface of parts or belt drive, especially its lateral surface! Do not use cleaning chemicals can damage articles made of artificial materials. Do not let the appearance of a protective casing of oil mist, oil leakage from associated knots! Always follow the instructions maintenance manuals for your car. Details can be found by clicking Brad Hames or emailing the administrator. Fill out the sign-label lies in each set and place it in a prominent place under the hood. Do not forget that any belt to be used as long as prescribed automaker. Replace all parts of the drive, if you have found or at least one of them, any defect or wear and tear caused by the operation!
Posted by: |